Shop All Range Hoods Shop All Bath Fans Shop All Air Conditioners Shop All Air Circulators Shop All Heaters Shop All Attic Fans Shop All Thermostats Shop All Tankless Water Heaters

ASHRAE 62.2 Basics

LETS START WITH THE ASHRAE 62.2 BASICS

ASHRAE 62.2 is a minimum national standard that provides methods for achieving acceptable indoor air quality in typical residences. The standard has three main components: Whole House Ventilation, Local Exhaust, and Source Control. The recommendations that follow are for most common conditions, extreme conditions require additional consideration.

Continuous Ventilation
Ventilation Air Requirements, CFM
Floor Area Bedrooms
(ft2) 0-1 2-3 4-5 6-7 >7
<1500 30 45 60 75 90
1501-3000 45 60 75 90 105
3001-4500 60 75 90 105 120
4501-6000 75 90 105 120 135
6001-7500 90 105 120 135 150
>7500 105 120 135 150 165

Whole House Ventilation

The exhaust fan dilutes the air in the main living spaces with outside air to remove unavoidable contaminants from people, pets, cleaning, offgassing, etc. The whole house fan flow rate is determined based on the floor space and the number of bedrooms. The whole house fan provides multiple air exchanges within the home each day. The operation can be continuous (if less than 1 sone) or intermittent (much higher airflow cycled by a timer) if less than 3 sones. The chart below outlines the minimum ventilation requirements for continuous operation.

Okay, So What Am I Looking For In a Whole House Fan

The key with a Whole House Exhaust Fan is quiet. In most cases the exhaust fan will be located in a central location of the home and will run continuously, so you want it to be quiet. ASHRAE 62.2 calls for continuously running exhaust fan to have a sound rating of less than 1.0 sones.

Whole House Continuous Ventilation Exhaust Fan Options

  • ECO-Exhaust Series
  • Deluxe Quiet Series
  • Easy Installation Series

Local Exhaust

Local Exhaust removes high concentrations of contaminants in the rooms where they occur (kitchens and bathrooms). The local exhaust fans can operate continuously (if less than 1 sone) at a lower flow rate (CFM), or intermittently (cycled by a switch or timer) at a higher flow rate if less than 3 sones. If operated continuously or on a timer the local exhaust fan flow reduces the whole house exhaust fan flow requirement. ASHRAE 62.2 Local Exhaust can be solved in three ways – On Demand Local Exhaust, Continuous Local Exhaust, or Intermittent Local Exhaust.

On Demand Local Exhaust

ASHRAE 62.2 requires each room that creates contaminants (bathrooms, kitchens, art studios, etc.) must have some type of exhaust that clears the air to the outside of the home. For this scenario a whole house continuous exhaust fan would be located in a central area of the home to meet the requirements for whole house ventilation. In each of the rooms that create contaminants an exhaust fan (or range hood for the kitchen) would be utilized. Exhaust fans need to operate at less than 3.0 sones and typically utilize at least a 4" duct. By using separate local exhaust, it allows the room to be properly ventilated for size and need (a bathroom with a steam shower is going to need more than a powder room). This arrangement is already understood by home owners and installers and requires no new technology or training.

Local Exhaust Ventilation Options

ECO-Exhaust Series Deluxe Quiet Series Deluxe Quiet Series
Deluxe Quiet Series with Light High Performance Series Deluxe Series with Light
Decorative Series with Light Fire Rated Series Economical Series
Economical Series with Light

Intermittent Local Exhaust

In this option, the local exhaust fan is used to reduce the flow of the whole house fan. The local exhaust fan would be located in the bathroom instead of in a central location of the home and would be on a 24 hour timer switch that would cycle the fan on and off throughout the day. This involves a little more calculating. If the fan will be on less than 35% of the time you'll need to increase the flow rate 3 times (50=150). If the fan will be on 35-60% of the time you need to increase the flow rate 2 times (50=100) and if the fan will be on 60-80% of the time you need to increase the flow rate 1.33 times (50=67). As an example, if you need 50 CFM of continuous whole house ventilation, you could use a 100 CFM fan for 12 hours a day to obtain the required ventilation. These fans are not required to be as quiet as a whole house continuous fan, but still need to be below 3.0 sones. A fan used in this manner will also need an override switch to allow the occupant to turn the fan on or off when desired. Careful consideration should be given to the location of the fan and the run time (Do you really want a 3 sone fan in the master bath running every other hour at night?)

Continuous Local Exhaust

In this option, the local exhaust fan can provide some or all of the whole house ventilation requirement. A continuously operating fan would be located in the bathroom in addition to, or instead of, a central location of the home. This would solve both the whole house (diluting the air in the living space) and local exhaust (removing contaminants where they occur) requirement. Dual speed fans are a perfect solution for this application. A dual speed fan allows you to ventilate at a low flow continuously and then jump to a boost speed when you occupy the room such as when the shower is running and additional exhaust is needed to clear the room of steam and moisture.

Dual Speed Ventilation Exhaust Fan Options

  • ECO-Exhaust Series - Dual Speed
  • Deluxe Quiet Series
  • Deluxe Quiet Series with Light

Source Control

Many indoor air quality problems can be avoided by limiting the introduction of items with the potential for creating problems such as high VOC adhesives. Ventilation is not intended to overcome obvious defects such as a leaky basement, proper repairs are required.

Kitchen Ventilation

The standard requires either an outdoor vented rangehood (or microwave) sized for at least 100 cfm & less than 3 sones or a continuously operating kitchen exhaust fan sized for 5 air changes per hour. In a large kitchen this can be a lot of airflow so a vented rangehood operated on demand by the user is a much better choice.

What is best for me?

For the best indoor air quality it is recommended that the whole house fan be located in a central location and operate continuously and, install On Demand local exhaust fans in each Bathroom and a range hood vented to the outdoors in the kitchen.

More Resources

Many other details for proper design regarding solid fuel appliances, dryer exhaust, filters, air intakes, instructions for occupants, etc. can be found in section 6, refer to ASHRAE std 62.2 for additional guidance www.ashrae.org.

NOTE: The recommendations made here cover the most common situations and in our opinion represent the best way to meet the intent of the standard, derive the greatest benefit and also balance cost, complexity, operational simplicity, ease of installation and other factors. The ASHRAE Standard provides many other possibilities as well as specific exceptions that might apply to your situation (extreme cold, extreme humidity, etc.). If you have reason to suspect that your situation is outside the norm (steam sauna, indoor pool, high occupancy etc.) refer to Ashrae 62.2 for additional information or consult a professional for help.

Featured Bath Fans with Heaters

NuTone 9093WH
  • NuTone 9093WH
  • 70 CFM 3.5 Sone Ceiling Mounted HVI Certified Bath Fan with Light and Night Light
  • Our Price: $222.99
  • You Save 42%
  • Heat-A-Ventlite Collection
  • Available in 1 Finish
  • more details
Broan QTX110HL
  • Broan QTX110HL
  • 110 CFM 0.9 Sone Ceiling Mounted HVI Certified Bath Fan with Light and Night Light
  • Our Price: $241.69
  • You Save 53%
  • qt Collection
  • Available in 1 Finish
  • more details

Reasons To Shop at VentingDirect.com

  • Our Accomplishments

    400,000+ products shipped - Over 50 warehouses, 30 vendors, 20+ direct-manufacturer relationships - Top 30 Fastest Growing Retailer

  • Safest Place to Shop Online

    Read how we do more to protect your information and transactions.

  • Free Shipping

    Orders over $500 automatically receive Free Shipping!*

  • Build.com Network of Stores

    VentingDirect.com is a Network Store of Build.com. When shopping with VentingDirect.com, you have access to ALL of our stores. One account - everything home improvement and decor!

 

Top Sellers

  • Broan 512M

    Broan 512M

    70 CFM 3.5 Sone Wall Mounted HVI Certified Utility Fan

    Our Price: $62.16
  • Broan 688

    Broan 688

    50 CFM 4 Sone Ceiling or Wall Mounted HVI Certified Bath Fan

    Our Price: $13.48
  • NuTone 682NT

    NuTone 682NT

    Non-Ducted Ceiling or Wall Mounted Bath Fan

    Our Price: $35.62
  • Broan 744

    Broan 744

    70 CFM 1.5 Sone Ceiling Mounted HVI Certified Bath Fan with Light

    Our Price: $90.13
  • Air King AS50

    Air King AS50

    50 CFM Quiet Bath Fan Only with 3.0 Sones

    Our Price: $14.45

DON'T MISS A DEAL! Sign Up For Email SAVINGS Privacy Policy