Can I use this with a 4" duct?
The NuTone QTXN110HL is designed for a 6" duct size.

| Shipping: | Free Shipping on orders over $499.00! See Details |
|---|---|
| Ships In: |
This product leaves the warehouse in 2 to 4 days.
|
| Finish: |
White
|
A small footprint combined with high-level performance. You could wait 15 minutes for your central heating system to take the chill from your bathroom, all while it heats every other room in the house. Or, you could select instant heat when it’s needed with the QTXN line. Powerful heating, light and ventilation are available at the touch of a switch. And with our PowerHeat™ design, you’re assured that the energy converted to heat is efficiently delivered back to you.
This product is listed under the following manufacturer number(s):
*Denotes a finish or option that has been discontinued
The NuTone QTXN110HL is designed for a 6" duct size.
A 20amp circuit breaker is needed.
The NuTone QTXN110HL is suitable to fit 2" x 8" construction.
The NuTone QTXN110HL will have the same wiring. The two units do require different sizes for the housing. You can use this as a replacement as long your installation can be made for the larger housing.
The NuTone QTXN110HL is only available with the light.
The NuTone QTXN110HL is not recommended to reduce the exhaust for any reason. Reducing the exhaust will limit the output the product can achieve.
The NuTone QTXN110HL cannot be mounted over a tub or shower. It is only listed for damp locations not wet locations (such as over a shower).
No, the Product NuTone QTXN110HL is hardwired to your homes electrical system and has no internal fuse.
The NuTone QTXN110HL is applicable for all applications including pre-existing base board heaters.
The replacement heating element for the NuTone QTXN110HL bath fan is the NuTone S97016565.
The NuTone QTXN110HL functions are separately controlled. This cannot be used with a thermostat. It would just be wired to a standard 4 function wall switch. The part numbers are 77DV or 77DW.
Yes, you are correct.
The heater element is avaialble as a replacement part. You can see it here: http://www.ventingdirect.com/nutone-s97016565-heating-element/p440856
The NuTone QTXN110HL does not come with a switch. The NuTone 77D switch is recommended for use with this product.
Yes, the NuTone QTXN110HL can be used with or without the bulb.
The NuTone QTXN110HL grill part number is 97016473.
The fan functions can be wired independently of one another on the NuTone QTXN110HL, and the specification sheet has a wiring diagram that illustrates how to do this. The best option is a four-function wall control, so all functions can be controlled separately with one controller.
The NuTone QTXN110HL Combination Fan, Heater, Light, Night-Light, 110 CFM, 0.9 Sones, 1500W Heater requires 6" venting.
The NuTone QTXN110HL housing is 17-5/8" in length, 11-3/8" in width, and 7-5/8" in height. The wall switch dimensions will be the same as your standard size switch
| Function | Bath Fan, Heater, Light |
|---|---|
| Housing Depth | 7.625 |
| Light Included | Yes |
| Heater Included | Yes |
| Motion Sensor | No |
| Category | Sale |
| Configuration | Exhaust Fan |
| Amperage | 14.6 |
| Sones | 0.9 |
| Grille Finish | White Polymeric |
| CFM | 110 |
| Country Of Origin | USA |
| CFM (High) to Sones | 110 to 0.9 |
| Watts Per Bulb | 60, 7 |
| Lighting Watts Main | 2-60W/7W |
| Housing Length | 17.625 |
| Duct Size | 6" Round |
| Housing Width | 11.375 |
| Voltage | 120 |
| Bulb Base | Medium (E26) |
| Number of Bulbs | 1, 2 |
| Grille Width | 15 |
| UL Listed | Yes |
| CFM Range | 100 to 200 |
| Product Weight | 10.00 |
| Humidity Sensing | No |
| Wattage | 120, 14, 60, 7 |
| Material | Galvanized Steel |
| Sone Range | Under 1 |
| Collection | Ultra Silent QT |
| Installation Type | Ceiling |
| Grille Length | 20 |
| Bulb Type | Incandescent |
| UL Rating | Damp Location |
| Bulbs Included | No |
| HVI Certified | Yes |
Like many retailers, VentingDirect.com can choose to set its own prices independently. And even though manufacturers require VentingDirect.com and other retailers to display a product's "minimum advertised price" (or MAP), the retailer can choose to sell for less than that. But the price must be conveyed in other ways, and each individual manufacturer's MAP policy determines where the price can be seen.
To see the price for this product at VentingDirect.com, you'll need to place it in your shopping cart, and maybe even proceed to final checkout. If you're not ready to buy the product, simply remove it from the cart.
VentingDirect.com apologizes for any inconvenience. We'd just like to offer you the chance to save extra money while we adhere to manufacturers' MAP policies. VentingDirect.com is also working to educate manufacturers on how their policies impact customers and their buying behavior.
© 2000-2013 Build.com, Inc..
All Rights Reserved.
VentingDirect.com is a
Build.com, Inc Network Store